Tuesday, June 19, 2012

EASE J2534 Pass-Thru Reprogramming Assistant Software for Bosch Flasher Pro J2534 Reprogrammer - Version 10

EASE J2534 Pass-Thru Reprogramming Assistant Software for Bosch Flasher Pro J2534 Reprogrammer - Version 10
EASE J2534 Pass-Thru Reprogramming Assistant Software for Bosch Flasher Pro J2534 Reprogrammer - Version 10
EASE J2534 Pass-Thru Reprogramming Assistant Software for Bosch Flasher Pro J2534 Reprogrammer - Version 10
>>>> Only $297.00 Best Buy

EASE J2534 Pass-Thru Reprogramming Assistant Software for Bosch Flasher Pro J2534 Reprogrammer - Version 10 Product Description

The EASE Reprogramming Assistant makes J2534 reprogramming with the Bosch Flasher Pro easier. Reprogramming a vehicle controller seems like an intimidating task but it's easier than you'd think if you have an assistant to guide you. The exclusive EASE Reprogramming Assistant software guides you step-by-step thru the reprogramming process. It also includes many of the scan tool functions you need for reprogramming such as reading the VIN, DTCs, I/M status, MIL status & calibration and clearing DTCs. The EASE Assistant helps to eliminate the guesswork and costly mistakes, ensuring a successful reprogramming event. The software has manufacturer specific assistants for Chrysler, Ford, General Motors, Hyundai, Infiniti, Kia, Lexus, Nissan, Saab, Scion and Toyota. It also includes a universal assistant that can be used for other OEMs. These assistants are full of useful utilities and information designed to make your programming experience as easy as possible. (For example the Chrysler Asst. has part number look up and displays flash related TSBs). Each assistant provides a wizard to walk you through the steps of preparing for the programming process. They also provide links to the OEM's website and any known relearn information required after reprogramming the vehicle. You can use them to read and clear DTCs and to read Mode ItemOverviewsA permanent DTCs and MIL status. Many DTCs have the required learn procedures to help determine what needs to be done after a reprogram. You can also read the I/M status, estimate the result of an emissions inspection, view instructions for completing I/M Monitors, create a printable report of the vehicle before and after analyzing and much more. This package includes the Version 10 J2534 Reprogramming Assistant Software CD and one year of technical support. Requires: Windows PC, Bosch Flasher Pro Unit & Cables and Vehicle OEM data subscription(s).

EASE J2534 Pass-Thru Reprogramming Assistant Software for Bosch Flasher Pro J2534 Reprogrammer - Version 10 Feature

  • Exclusive reprogramming assistant software guides you step-by-step thru the reprogramming process
  • Helps to eliminate guesswork and costly mistakes and ensure a successful reprogramming event.
  • Includes necessary scan tool functions - read VIN, DTCs, I/M status, MIL status and calibration
  • Manufacturer specific software assistants/wizards and convienient links to OEM websites
  • Works with Bosch Flasher Pro J2534 Reprogrammer and most other J2534 compliant reprogrammers


[ Click Me To See Special Price ]



Saturday, June 2, 2012

CarDAQ-M Modular PassThru J2534 Vehicle Reflash Hardware

CarDAQ-M Modular PassThru J2534 Vehicle Reflash Hardware
CarDAQ-M Modular PassThru J2534 Vehicle Reflash Hardware
CarDAQ-M Modular PassThru J2534 Vehicle Reflash Hardware
>>>> Only $1,847.63 Best Buy

CarDAQ-M Modular PassThru J2534 Vehicle Reflash Hardware Product Description

CarDAQ-M is the newest SAE J2534-1 and J2534-2 Re-programming Pass-Thru The CarDAQ-M is the newest interface from Drew Technologies for communicating with newer automobiles, heavy duty trucks, and CAN networks. CarDAQ-M was designed from the ground up to help you keep up with today's rapidly changing vehicle technologies. The patented CarDAQ-M expansion system will always be ready for what tomorrow brings. Stop throwing tools away every time a vehicle OEM adds new technology. With CarDAQ-M, simple add new or enhanced capabilities when you need it. Designed to be upgraded in the field by guys with grease under their nails, if you can tighten a screw you can upgrade the CarDAQ-M. It is that easy The new J2534 pass-thru interface from Drew Technologies is the most adavanced, complete, and upgradable J2534 device available today. Designed to keep up with OEM technology that is constantly changing, the CarDAQ-M has expansion modules available to keep it on the brink of the latest automotive technology. The CarDAQ-M package includes: ?CarDAQ-M J2534-1 / J2534-2 vehicle interface?Installation CD with device driver (J2534 compatible)?CDP-J1962 vehicle interface cable?Ethernet Cable?USB Cable J2534 has become an invaluable service tool for any aftermarket shop in the last 5 years. Automotive electronics are becoming more complex. Manufacturers are adding more communication channels and more electronic control units to modern vehicles. The modular/expandable nature of the CarDAQ-M allows you as a technician to purchase new expansion modules as new technologies present new service opportunties.

CarDAQ-M Modular PassThru J2534 Vehicle Reflash Hardware Feature

  • Re-program and reflash all late model vehicles with OEM software & calibration files! CarDAQ-Plus was built for real world conditions
  • It performs the standard PassThru J2534 functionality, adds an internal 200MHz embedded Linux host, a CompactFlash slot, and an internal webserver for thin-client applications
  • In addition to acting as a laptop-to-vehicle PassThru device, it can also host diagnostic and datalogging applications on-board. The J1962 Vehicle cable is now included at one low price
  • CarDAQ-M is the newest SAE J2534-1 and J2534-2 Re-programming Pass-Thru
  • CarDAQ-M was designed from the ground up to help you keep up with today's rapidly changing vehicle technologies. The patented CarDAQ-M expansion system will always be ready for what tomorrow brings.


[ Click Me To See Special Price ]



Friday, June 1, 2012

CarDAQ-Plus - PassThru J2534 Vehicle Reflash Hardware

CarDAQ-Plus - PassThru J2534 Vehicle Reflash Hardware
CarDAQ-Plus - PassThru J2534 Vehicle Reflash Hardware
CarDAQ-Plus - PassThru J2534 Vehicle Reflash Hardware
>>>> Only $1,638.00 Best Buy

CarDAQ-Plus - PassThru J2534 Vehicle Reflash Hardware Product Description

CarDAQ-Plus SAE J2534-1 and J2534-2 Re-programming Pass-Thru The CarDAQ-Plus by Drew Technologies is the ultimate interface for communicating with newer automobiles, heavy duty trucks, and CAN networks. It has both Ethernet and USB connectivity to a PC, a built-in operating system for running internal programs, protocol support for all modern vehicles, and six analog inputs. No other J2534 tool on the market has the performance and capabilities of the CarDAQ-Plus. It is upgradeable thru firmware updates and expansion slots. The CarDAQ family is the most talked-about J2534 interface out available anywhere. The CarDAQ-Plus package includes: ?CarDAQ-Plus J2534-1 / J2534-2 vehicle interface?Installation CD with device driver (J2534 compatible)?CDP-J1962 vehicle interface cable?Ethernet Cable?USB Cable Servicing newer, more increasingly complicated vehicles has put independent repair shops at a disadvantage against auto dealerships that have access to the latest service tools and knowledge databases. Accurately diagnosing and repairing many of these newer vehicles used to require full access to expensive factory service tools. The EPA recognized the independent repair shop's need for access and mandated that all OEMs comply with the SAE standard J2534-1. The SAE J2534-1 standard defines a uniform hardware device, like the Drew Technologies CarDAQ-Plus, that all automakers must support with their vehicle reflashing applications.

CarDAQ-Plus - PassThru J2534 Vehicle Reflash Hardware Feature

  • Re-program and reflash all late model vehicles with OEM software & calibration files! CarDAQ-Plus was built for real world conditions
  • It performs the standard PassThru J2534 functionality, adds an internal 200MHz embedded Linux host, a CompactFlash slot, and an internal webserver for thin-client applications
  • In addition to acting as a laptop-to-vehicle PassThru device, it can also host diagnostic and datalogging applications on-board. The J1962 Vehicle cable is now included at one low price


[ Click Me To See Special Price ]



Wednesday, May 30, 2012

EASE J2534 Pass-thru GM, Ford & Chrysler Powertrain Off-board Reprogramming Cable Set (6 Cables) & Adapter for Drew Tech CarDAQ-Plus J2534 Reprogrammer

EASE J2534 Pass-thru GM, Ford & Chrysler Powertrain Off-board Reprogramming Cable Set (6 Cables) & Adapter for Drew Tech CarDAQ-Plus J2534 Reprogrammer
EASE J2534 Pass-thru GM, Ford & Chrysler Powertrain Off-board Reprogramming Cable Set (6 Cables) & Adapter for Drew Tech CarDAQ-Plus J2534 Reprogrammer
EASE J2534 Pass-thru GM, Ford & Chrysler Powertrain Off-board Reprogramming Cable Set (6 Cables) & Adapter for Drew Tech CarDAQ-Plus J2534 Reprogrammer
>>>> Only $547.00 Best Buy

EASE J2534 Pass-thru GM, Ford & Chrysler Powertrain Off-board Reprogramming Cable Set (6 Cables) & Adapter for Drew Tech CarDAQ-Plus J2534 Reprogrammer Product Description

To reprogram a vehicle controller out of the vehicle you need to connect to the data, power and ground pins in the controller's connector. This sounds difficult since there are many different controllers, connectors and pin out diagrams. The EASE Off-Board Reprogramming Set for GM, Ford & Chrysler makes off-board reprogramming easier. Based on vehicle selection, the included software designates which off-board cable to use and provides the wiring diagram you need to ensure a successful reprogramming event. This cable set works with the Drew Tech CarDAQ-Plus and most other J2534 compliant reprogrammers. With this package and an OEM data subscription, you can reprogram supported 1996+ GM, Ford and Chrysler powertrain (PCM/ECM) flash reprogrammable controllers out of the vehicle using the following process. 1) Purchase a data subscription from the vehicle's OEM website (affordable short-term subscriptions are available). 2) Select the vehicle in the EASE Off-Board Cable Selection Software. 3) Using the pin-out diagram from the software, connect the specified EASE off-board cable to the vehicle controller's connector pins and the included EASE Off-Board Reprogramming Adapter (ORA). 4) Next connect the Drew Tech CarDAQ-Plus unit to the ORA's OBD II DLC port. 5) Plug the ORA's power transformer into any wall outlet. You are now set up to reprogram the vehicle controller. This package includes the following: EASE Off-Board Cable Selection Software - Version 10, GM off-board cables 1-3, Ford Off-board cable 1, Chrysler off-board cables 1- 2, Off-board Reprogramming Adapter, power transformer, one year of technical support and one year limited warranty. Requires: Windows PC, Drew Tech CarDAQ-Plus unit & cables and vehicle OEM data subscription(s). Note: All controllers cannot be reflashed off-board. Some may require connections to other controllers during reflash.

EASE J2534 Pass-thru GM, Ford & Chrysler Powertrain Off-board Reprogramming Cable Set (6 Cables) & Adapter for Drew Tech CarDAQ-Plus J2534 Reprogrammer Feature

  • Reprogram most GM, Ford and Chrysler powertrain (PCM/ECM) vehicle controllers on your bench top
  • Software designates which off-board cable to use and provides wiring diagram you need.
  • Works with Drew Tech CarDAQ-Plus J2534 Reprogrammer
  • Use for your shop's convenience and to provide a billable servcie to other shops in your area
  • Does NOT include OEM vehicle data subsciptions. These are required and must be purchased from OEM


[ Click Me To See Special Price ]



Tuesday, May 29, 2012

EASE J2534 Pass-Thru Reprogramming Assistant Software for Drew Tech CarDAQ-Plus J2534 Reprogrammer - Version 10

EASE J2534 Pass-Thru Reprogramming Assistant Software for Drew Tech CarDAQ-Plus J2534 Reprogrammer - Version 10
EASE J2534 Pass-Thru Reprogramming Assistant Software for Drew Tech CarDAQ-Plus J2534 Reprogrammer - Version 10
EASE J2534 Pass-Thru Reprogramming Assistant Software for Drew Tech CarDAQ-Plus J2534 Reprogrammer - Version 10
>>>> Only $297.00 Best Buy

EASE J2534 Pass-Thru Reprogramming Assistant Software for Drew Tech CarDAQ-Plus J2534 Reprogrammer - Version 10 Product Description

The EASE Reprogramming Assistant makes J2534 reprogramming with the Drew Tech CarDAQ-Plus easier. Reprogramming a vehicle controller seems like an intimidating task but it's easier than you'd think if you have an assistant to guide you. The exclusive EASE Reprogramming Assistant software guides you step-by-step thru the reprogramming process. It also includes many of the scan tool functions you need for reprogramming such as reading the VIN, DTCs, I/M status, MIL status & calibration and clearing DTCs. The EASE Assistant helps to eliminate the guesswork and costly mistakes, ensuring a successful reprogramming event. The software has manufacturer specific assistants for Chrysler, Ford, General Motors, Hyundai, Infiniti, Kia, Lexus, Nissan, Saab, Scion and Toyota. It also includes a universal assistant that can be used for other OEMs. These assistants are full of useful utilities and information designed to make your programming experience as easy as possible. (For example the Chrysler Asst. has part number look up and displays flash related TSBs). Each assistant provides a wizard to walk you through the steps of preparing for the programming process. They also provide links to the OEM's website and any known relearn information required after reprogramming the vehicle. You can use them to read and clear DTCs and to read Mode ItemOverviewsA permanent DTCs and MIL status. Many DTCs have the required learn procedures to help determine what needs to be done after a reprogram. You can also read the I/M status, estimate the result of an emissions inspection, view instructions for completing I/M Monitors, create a printable report of the vehicle before and after analyzing and much more. This package includes the Version 10 J2534 Reprogramming Assistant Software CD and one year of technical support. Requires: Windows PC, Drew Tech CarDAQ-Plus & Cables and Vehicle OEM data subscription(s).

EASE J2534 Pass-Thru Reprogramming Assistant Software for Drew Tech CarDAQ-Plus J2534 Reprogrammer - Version 10 Feature

  • Exclusive reprogramming assistant software guides you step-by-step thru the reprogramming process
  • Helps to eliminate guesswork and costly mistakes and ensure a successful reprogramming event.
  • Includes necessary scan tool functions - read VIN, DTCs, I/M status, MIL status and calibration
  • Manufacturer specific software assistants/wizards and convienient links to OEM websites
  • Works with Drew Tech CarDAQ-Plus J2534 Reprogrammer and most other J2534 compliant reprogrammers


[ Click Me To See Special Price ]



Monday, May 28, 2012

EASE J2534 Pass-Thru Reprogramming Assistant Software for Snap-on Pass Thru Pro II J2534 Reprogrammer - Version 10

EASE J2534 Pass-Thru Reprogramming Assistant Software for Snap-on Pass Thru Pro II J2534 Reprogrammer - Version 10
EASE J2534 Pass-Thru Reprogramming Assistant Software for Snap-on Pass Thru Pro II J2534 Reprogrammer - Version 10
EASE J2534 Pass-Thru Reprogramming Assistant Software for Snap-on Pass Thru Pro II J2534 Reprogrammer - Version 10
>>>> Only $297.00 Best Buy

EASE J2534 Pass-Thru Reprogramming Assistant Software for Snap-on Pass Thru Pro II J2534 Reprogrammer - Version 10 Product Description

The EASE Reprogramming Assistant makes J2534 reprogramming with the Snap-on Pass Thru Pro II easier. Reprogramming a vehicle controller seems like an intimidating task but it's easier than you'd think if you have an assistant to guide you. The exclusive EASE Reprogramming Assistant software guides you step-by-step thru the reprogramming process. It also includes many of the scan tool functions you need for reprogramming such as reading the VIN, DTCs, I/M status, MIL status & calibration and clearing DTCs. The EASE Assistant helps to eliminate the guesswork and costly mistakes, ensuring a successful reprogramming event. The software has manufacturer specific assistants for Chrysler, Ford, General Motors, Hyundai, Infiniti, Kia, Lexus, Nissan, Saab, Scion and Toyota. It also includes a universal assistant that can be used for other OEMs. These assistants are full of useful utilities and information designed to make your programming experience as easy as possible. (For example the Chrysler Asst. has part number look up and displays flash related TSBs). Each assistant provides a wizard to walk you through the steps of preparing for the programming process. They also provide links to the OEM's website and any known relearn information required after reprogramming the vehicle. You can use them to read and clear DTCs and to read Mode ItemOverviewsA permanent DTCs and MIL status. Many DTCs have the required learn procedures to help determine what needs to be done after a reprogram. You can also read the I/M status, estimate the result of an emissions inspection, view instructions for completing I/M Monitors, create a printable report of the vehicle before and after analyzing and much more. This package includes the Version 10 J2534 Reprogramming Assistant Software CD and one year of technical support. Requires: Windows PC, Snap-on Pass Thru Pro II Unit & Cables and Vehicle OEM data subscription(s).

EASE J2534 Pass-Thru Reprogramming Assistant Software for Snap-on Pass Thru Pro II J2534 Reprogrammer - Version 10 Feature

  • Exclusive reprogramming assistant software guides you step-by-step thru the reprogramming process
  • Helps to eliminate guesswork and costly mistakes and ensure a successful reprogramming event.
  • Includes necessary scan tool functions - read VIN, DTCs, I/M status, MIL status and calibration
  • Manufacturer specific software assistants/wizards and convienient links to OEM websites
  • Works with Snap-on Pass Thru Pro II J2534 Reprogrammer and most other J2534 compliant reprogrammers


[ Click Me To See Special Price ]



Sunday, May 27, 2012

EASE OBD II Generic PC Scan Tool Software Add-on for Snap-on Pass Thru Pro II J2534 Reprogrammer - Version 10

EASE OBD II Generic PC Scan Tool Software Add-on for Snap-on Pass Thru Pro II J2534 Reprogrammer - Version 10
EASE OBD II Generic PC Scan Tool Software Add-on for Snap-on Pass Thru Pro II J2534 Reprogrammer - Version 10
EASE OBD II Generic PC Scan Tool Software Add-on for Snap-on Pass Thru Pro II J2534 Reprogrammer - Version 10
>>>> Only $147.00 Best Buy

EASE OBD II Generic PC Scan Tool Software Add-on for Snap-on Pass Thru Pro II J2534 Reprogrammer - Version 10 Product Description

Did you know that you could use your Snap-on Pass Thru Pro II Reprogrammer for more than just on-board reprogramming? You can use your Pass Thru Pro II as a scan tool interface with the EASE Version 10 PC Scan Tool Software Add-on. When you combine the power of the EASE PC Scan Tool with the Pass Thru Pro II Reprogrammer you can scan and reflash using a single interface. The EASE PC Scan Tool offers more software features than any other scan tool. Vehicle information is presented in a user friendly format that you can quickly navigate through to find what you need to get the vehicle fixed right - the first time. With the EASE PC Scan Tool, you'll see loads of vehicle data in a user-friendly format on your large PC screen so you can quickly see the whole picture - making your job much easier. Features: View vehicle data in grid, graph or meter format; Full expanded Generic PID support - 140+ PIDS; Plus EASE custom PIDS like Rich/Lean Status, Engine Vacuum and Acceleration; Read and clear Generic and Manufacturer Specific DTCs, Freeze Frame, I/M monitors and MIL; High definition graphing with up to 6 graphs, auto-scale, zoom and pan; Overlay PIDS on a graph; Unlimited record capability with snapshots and markers; Read VIN and CAL ID with Mode 9 support; find misfires with Mode 6 support; Fast data sampling modes; Print reports; Includes DTC, acronym and parameter libraries and much more. The EASE Scan Tool software is easy to install and use on your Windows desktop or laptop PC. The OBD II Generic PC Scan Tool Software Add-on supports OBD II Generic Data for all USA OBD II compliant vehicles - typically 1996 and newer GM, Ford, Chrysler, Asian and European vehicles. This item includes the EASE Version 10 OBD II Generic Scan Tool Installation DVD, one software access code and one year of support. Requires: A Windows PC with free USB port, Snap-on Pass Thru Pro II Unit & Cables.

EASE OBD II Generic PC Scan Tool Software Add-on for Snap-on Pass Thru Pro II J2534 Reprogrammer - Version 10 Feature

  • Use your Snap-on Pass Thru Pro II Reprogrammer as a PC Scan Tool.
  • No need to buy two systems - perform reprogramming and diagnostics using a single interface.
  • Read OBD II Generic data & DTCs from 1996+ Domestic, Asian and European cars and light trucks
  • Full expanded Generic PID support and custom PIDs like Rich/Lean Status, Engine Vacuum, Acceleration
  • Enhanced DTC scan and description library. Read permanent DTCs (Mode ItemFeaturesA/10). Mode 6 and 9 Support.


[ Click Me To See Special Price ]